Mplay remote configuration, How to assign player channels, Channel explorer shortcuts – EVS IPDirector Version 5.9 - January 2011 Part 1 User’s Manual User Manual

Page 104

IPDirector Version 5.9 – User Manual – Part 1: General Workspace

EVS Broadcast Equipment -– January 2011

Issue 5.9.B

LAY

EMOTE

ONFIGURATION

You can access the Remote Control Manager window from the IPDirector main

window, via Tools > Remote Control Manager.

Then, select the tab corresponding to the MPlay Remote device.
Several MPlay remote devices can be connected. In this case, as many tabs are
displayed as they are devices. One of the device is defined as Master, the other
ones as slaves. This is done in the Remote Installer. Refer to the Technical
Reference manual.

How to Assign Player Channels

You will be able to control up to four player channels with one device.

To assign player channels to the MPlay Remote, proceed in one of the following
ways:

•

From the Channel Name contextual menu:

•

Drag-and-drop operation from the Channel Explorer:

Open the Channel Explorer.

Select the player channel and drag it to one of the four Linked Channels