Call parking and parked call retrieving – AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 76

Operations during a Call

MD Evolution – Dialog 4425 IP Vision

Call Parking and Parked Call Retrieving

When you are carrying on a single conversation, you may park the

current call, in order to subsequently retrieve it on a different exten-

sion. For example, this would allow you to change offices without

losing your call.
To do so, whether you are carrying on a conversation using the

handset or handsfree mode:

Press a free line key of your extension for which LED is not lit.

Your party is then placed on hold.

Dial the prefix “10”, granting access to the call parking
service.

ID. CODE

Dial the identification code for the call you wish to park.

This call identification code will be requested later when you retrieve

the parked call. This code is unrestricted, and may consist of 1 or

2 digits, according to your facility’s configuration (usually 2 digits).

Call

Press the dynamic function key shown on the left.

A confirmation that the service was accepted is provided both visually

and audibly; the “Accepted Service” message is displayed on the

screen, and the accepted service tone is played.

Hang up the handset, or press the “C” key to end this service
in handsfree mode.

Your extension returns to the idle status.
You may then move about freely, then return to the parked call on

any other extension.

Settings

CallList

PhoneBook WAP Services

15:49

07 Nov 2008

SMITH Peter

WESSON Paul 407

405

Hold

Conf/Transf