AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 134)

Group Services
MD Evolution – Dialog 4425 IP Vision 134
Extension Supervision and Associated
Services
As already indicated (see the “ Operations for Outgoing Calls ” section),
you may save numbers for your favoured parties on any of your
extension’s 12 programmable repertory keys, or any of the repertory
keys available on one or several associated satellite key panel(s), as
the case may dictate.
The corresponding programming of each repertory key is entirely up
to you. See the “ Physical Programming of Your Extension ” section.
This enables you to very simply place a call to one of your favoured
parties by pressing the corresponding repertory key.
If the number saved corresponds to one of your colleagues, the LED
for the same repertory key allows you to faithfully and remotely
supervise his/her extension (and vice versa). Thus:
Rx
Ô
The repertory key’s LED is off when the extension you are
supervising is free.
Rx
Ц Ф
The repertory key’s LED flashes when the extension you are
supervising is ringing.
Rx
Х Ф
The repertory key’s LED is on when the extension you are
supervising is busy.
This allows you to ensure a mutual coverage of calls between you
and your colleagues.
It also simplifies call pick-up, since all a user needs to do is press
the corresponding repertory key, instead of dialling the remote
extension number. See also the “ Operations for Incoming Calls ”
section.
Note: Your extension’s repertory and satellite keys are
programmed and saved in a centralised location. Therefore,
these settings are saved, even if power to your extension is
lost. Moreover, these settings follow you whenever you sign
on to an IP H.323 extension other than your own.