Major system alarm message indication – AASTRA 4425 IP Vision for MD Evolution User Guide User Manual
Page 208
Services Reserved for Attendants
MD Evolution – Dialog 4425 IP Vision
208
RESET
Select the dynamic function key shown on the left.
You are prompted to confirm, and then the charge counter
assigned to this extension is reset to zero.
Or,
Select the dynamic function key shown on the left.
The report for the charge counter assigned to the extension is printed
on a system printer that may be connected to your telephone facility.
As illustrated below, the printout provides the costs for the calls
that are imputed to the involved extension, in two currencies – local
currency (e.g. French Francs) and Euros.
On 15 May – 5:35 p.m.
In both cases, either after a reset or a printout of the charge
counter, a report is provided.
Note: The “External cost” service enables you to manage,
in a similar manner, the charge counters that are processed
in relation to the public network access ports, instead of
your facility’s extensions.
Major System Alarm Message Indication
On your attendant’s position, you may also receive an indication
that there is a major alarm within your telephone system. From your
idle position and when in the active general calls acceptance mode,
you are notified by the display of the label “AL” on the first line of
your position’s screen.
Printout of users’ charge counters.
DN
TS
CHARGES
COST1
COST2
407
TELEPHONY
42
27.55 FF
4.20 EUR
Settings
CallList
PhoneBook WAP Services
AL
AT enabled
15:49
07 Nov 2008
SMITH Peter
405
Log off
2 Missed