AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 57

MD Evolution – Dialog 4425 IP Vision

Operations for Outgoing Calls

Or, to call the attendants:

Dial the number 9 (generally).

Or, for an external call:

0 + EXT. NO

Dial the ad-hoc network access prefix, followed by the number
for the external party to be reached.

Note: The prefix to dial for external calls is generally “0” to

access the public network. Accessing a private network

depends on your facility’s configuration.

Calling with Abbreviated Dialling
(Speed Dialling)

You may also place your external calls more quickly by using the

abbreviated dialling (speed dialling) service.
This enables you to contact your external parties using shorter

numbers than the norm, usually just 3 or 4 digits.
Usually, you will have access to a general list of abbreviated numbers

valid for all users in your facility.
Additionally, based on your user rights, you may also have access

to a personal list of 20 abbreviated numbers that are either personal,

or shared among a restricted group of users.
All of these abbreviated numbers are managed by your system

administrator or possibly your facility’s attendants. Contact them as

needed.
To contact an external party using abbreviated numbers, after

lifting the handset or in handsfree mode:

Dial “2”, giving you access to abbreviated dialling.

ABBR. NO

Then directly dial the abbreviated number associated with
the external party to be contacted.

Call

Press the dynamic function key shown on the left.

The call is then established just as if you had manually dialled the

external party’s number.