AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 106

Call Forwarding Services

MD Evolution – Dialog 4425 IP Vision

106

Then, as necessary:

* *

Complete the message, replacing the “*” in the message with
numbers from your keypad.

Once the message is selected, it needs to be completed with the

numerical information such as a return hour and minutes, an end of

absence date and time, or a telephone number. To do so, use your

extension’s keypad, holding each key down for approximately

2 seconds, and, if necessary, using the “Erase” option to cancel

the last character entered.

Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.

Or, to define a personalised message:

MESSAGE

Directly compose your own personalised message.

To do so, proceed in the same manner as you did to consult your

facility’s directory (see previously mentioned details). The letters are

entered by repeatedly pressing your extension’s keypad keys; the

“1” key is used to enter a space, dash and other punctuation marks;

pressing the “*” key toggles between uppercase and lowercase

characters.
When necessary, the “Erase” option (located where “Select” usually

is) enables you to correct the last character entered.

Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.

In every case, once the message has been completely defined:

Select

Press the dynamic function key shown on the left.

The purpose of this is to validate your entry; then your extension

displays its acceptance of your service programming.

REPORT

The requested service is accepted:

CALL FORWARD MSG ACCEPTED

BACK

Options

Select