AASTRA 4425 IP Vision for MD Evolution User Guide - Manual (Page 19)

19 MD Evolution – Dialog 4425 IP Vision
IP Declaration and Start-Up of Your Extension
IP Declaration and Start-Up of Your
Extension
The first time you use your Dialog 4425 IP Vision, once it has been
connected to the power supply and your company’s LAN, it is
necessary for it to be configured in relation to your company’s IT
network.
This is usually carried out by your system administrator only once,
at the time of installation. However, this section does provide you
with the instructions to do this yourself, or at least to know how to
access your extension’s IP environment characteristics that you
may need to provide to your system administrator if a problem
arises with your extension.
This section also provides you with information concerning the
process of starting up your extension.
Declaring Your Extension’s IP Network
Parameters
To manage your extension’s IP environment characteristics within
your company’s IT network, from your idle extension: í *
5 Begin by simultaneously pressing and holding all three of the
keys shown on the left for approximately one second.
This is required in order to modify your extension’s IP network
parameters. Otherwise, by default, this information may only be
consulted, not modified. An acceptance tone confirms your
request.
Press the left navigation key on your extension twice.
This will highlight the “Settings” tab on the first line of your
extension’s screen, and you access your extension’s physical
programming services.
ЕЖЗ