Silent ringing function – AASTRA 4425 IP Vision for MD Evolution User Guide User Manual
Page 55
55
MD Evolution – Dialog 4425 IP Vision
Operations for Incoming Calls
Notes:
The prefix “13” is the one usually used to access the indi-
vidual call pick-up service. It may, however, have been
modi-
fied by your system administrator.
Rather than dialling the number of the extension to pick-up,
you may also press the repertory key where this number
may have been saved.
Your extension may also be subject to call pick-ups from
third party sets.
Certain extensions (such as yours) may possibly be equipped
with a permanent protection against call pick-up. If this is
the case, this service will obviously be refused on these
extensions (and vice-versa).
Silent Ringing Function
This function may be used when you wish to not be disturbed by the
ringing of the telephone. When it is activated only your extension’s
screen display and the flashing of a line key will advise you of a new
incoming call.
To activate this function from an idle extension:
É
Press this key to activate silent ringing for incoming calls.
The associated LED will remain lit to remind you that this function is
activated.
A crossed-out musical note will also be displayed on your
extension, temporarily replacing the icon that usually displays your
extension’s ring volume level.
Settings
CallList
PhoneBook WAP Services
CS
GC
15:49
07 Nov 2008
SMITH Peter
405
Log off
2 Missed