AASTRA 4425 IP Vision for MD Evolution User Guide User Manual
Page 100
Call Forwarding Services
MD Evolution – Dialog 4425 IP Vision
100
In the last case, a confirmation of acceptance of the “Do not disturb”
call forward is provided by your extension; all you need to do is exit
your extension’s service programming mode (see details to follow).
To define the number to receive your call forwards:
FWD NO
z
Enter the internal or external number to receive your call
forwards.
To do so, use your extension’s keypad, hold each key down for
approximately 2 seconds, and, if necessary, using the “Erase”
option to cancel the last character entered.
As previously indicated, the recipient’s number may contain up to
18 digits, including the network access prefix. An external number
may be a number that is accessible through abbreviated dialling.
Þ
Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.
The dynamic option “Erase” becomes “Select”.
Select
Press the dynamic function key shown on the left.
The purpose of this is to validate your entry, and then your extension
displays its acceptance of your service programming (see details to
follow).
Or, to identify your call forward recipient by his/her name:
2 times
Þ
Press twice the dynamic function key shown on the left until
you are prompted to input a name.
CALL FORWARD - IMMEDIATE
Input a number: <507>
Input a name: < >
OK
Options
Ы
Ю
Select
OK
CALL FORWARD - IMMEDIATE
Input a number: <>
OK
Input a name:
T U V ы щ 8
Options
Ы
Ю
Select
OK