AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 205

205

MD Evolution – Dialog 4425 IP Vision

Services Reserved for Attendants

TK GROUP NO

Dial the number for the involved trunks group.

To do so, use your extension’s keypad, holding each key down for

approximately 2 seconds, or use the “Erase” option to cancel the

last character entered.
This number corresponds to the external network for which you

wish to obtain the incoming calls service quality information.

Generally, you need to enter the value “1”, which corresponds to

the public network trunks group. The alternative values are from “2”

to “8”.

Press the dynamic function key shown on the left.

PERIOD NO

Make your observation period selection, either “0” or “1”.

Value “0” corresponds to the period elapsed since the last time the

traffic counters were reset to zero. Value “1” corresponds to a pre-

defined selected period.

Press the dynamic function key shown on the left in order to
have the “OK” option highlighted.

The dynamic option “Erase” becomes “Select”.

Select

Press the dynamic function key shown on the left.

According to the previous selection, the results are displayed as

illustrated in one of the screens that follow; the first indicates the

date of the last traffic counter reset, the other the pre-defined

observation period.
The number of incoming calls received from the external network

identified by its trunks group number is displayed in a 5-digit format;

if that number exceeds those place values, it will be followed by

asterisks (*).
The percentage of calls lost varies between 0 and 99%.

INCOMING CALLS STATS BY TRUNK

Incoming calls stats. since the 15/03/2008 - 18:30.

For trunk 1, 13% of calls lost for 8320 calls
received.

BACK

Options

Select