AASTRA 4425 IP Vision for MD Evolution User Guide User Manual

Page 121

121

MD Evolution – Dialog 4425 IP Vision

Voice Mail Services

Dial “*” in order for your call to be transferred to the voice
mail.

Code “*” is the code used by default to consult a voice mail system

through an automated attendant. It may have been replaced by the

code “#”.
You are then connected to the voice mail system and are

prompted to dial the mailbox number you wish to access.

STATION NO

Dial your extension number, which is also your mailbox
number.

As with internal consultation, a system message prompts you to

enter your user password.

PASSWORD

Enter your user password.

By default, your user password is “1234”, however you may have

modified it. See also the “

section.
You are now connected to your mailbox’s consultation menu (see

details to follow).

Notes:

Interaction with the voice mail system or automated attend-

ant is carried out through the exchange of DTMF codes. For

an internal call, the transition to DTMF end-to-end dialling is

automatic. It is also the default from an external analogue

DTMF extension. From a GSM mobile phone, transition to

DTMF end-to-end dialling may necessitate a specific opera-

tion, depending on the type of GSM mobile phone involved.

The above method is also applicable for consulting your

voice mail from a third party set within your facility. Simply

begin by dialling the internal number – typically 885 – for the

automated attendant.

An alternative solution for accessing your mailbox from

outside your facility is dialling your DID number. If your

extension is effectively call forwarded to the voice mail

system, the rest of the procedure is identical to that

described.