AASTRA DT690 for BusinessPhone User Guide EN - Manual (Page 99)

C ORDLESS P HONE FOR B USINESS P HONE
99 1424-EN/LZT 103 092 Uen D 2010-02-12
PIN code is by default (0000) but it can be changed to any 4-8 digit code,
see Changing the PIN Code on page 99.
To activate the phone lock, do the following:
1. Press Menu, select , and press Select.
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select On, or On in charger, and press Select.
6. Enter the PIN code, and press OK.
7. Press Back to save the settings.
When the phone is locked, is shown in the display.
Note: If configured in the WinPDM or CPDM, it is possible to make an
emergency call while the phone or keypad is locked. During an
ongoing emergency call, the soft keys More and R are disabled.
If PIN code is lost it is possible to configure a new, or to do a
factory reset in WinPDM or CPDM, contact the system adminis-
trator.
17.4.4 Deactivating the Phone Lock
To deactivate the Phone lock function, do the following:
1. Press Menu, select , and press Select.
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Auto phone lock and press Select.
5. Select Off, and press Select.
6. Enter the PIN code, press OK.
7. Press Back to save the setting.
17.4.5 Changing the PIN Code
To change PIN code, do the following:
1. Press Menu, select , and press Select.
2. Select Locks and press Select.