AASTRA DT690 for BusinessPhone User Guide EN - Manual (Page 64)

1424-EN/LZT 103 092 Uen D 2010-02-12 64
D URING C ALLS
11.9.2 Terminating the Ongoing Call
To terminate the ongoing call and answer the waiting call, do the
following:
1. Press to finish the ongoing call.
The waiting call is signalled on your phone
2. Press to answer the new call.
11.10 Conference
The conference function allows up to 7 conference participants. Only the
conference leader (that is, the person initiating the conference) can
admit participants.
During the conference, a special tone will be heard every 15 seconds as
a reminder of the ongoing conference. Each time a participant enters or
leaves the conference, a burst tone is heard.
When the conference leader leaves the conference, the conference will
continue with the other included parties. When only two participants are
left, the conversation is changed back to a normal two party connection.
Note: This feature needs to be configured in the WinPDM or CPDM by
the system administrator.
When you have an ongoing conversation and want to establish a phone
conference, do the following:
1. Press More, select New Call, and press Select.
This will put the first call on hold.
2. Dial the number, and press .
When the third party has answered, continue with the following to
establish a conference:
3. Press More, select Conference and press Select.
Note: If Conference does not appear when you press More, you
can also do the following to establish a conference: Press R, dial
the number to include, and press 3.
4. Repeat the procedure to add more conference members.