Garmin G950 Tecnam 2006T - Manual (Page 86)

Garmin G950 Pilot’s Guide for the Tecnam P2006T 190-01146-00 Rev. A 74
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Alerting is inhibited while the aircraft is on the ground and until the aircraft reaches 150 feet above the setting
for the alert. If the aircraft proceeds to climb after having reached the MDA/DH, once it reaches 50 feet above
the MDA/DH, alerting is disabled.
The MDA/DH may be set from the PFD. It is synchronized on both PFDs in a 3 Display System. The function
is reset when the power is cycled.
Setting the barometric minimum descent altitude/decision height and bug:
1) Select the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the ‘Minimums’ field (Figure 2-41).
3) Turn the small FMS Knob to select ‘BARO’. ‘OFF’ is selected by default. Press the ENT Key or turn the large
FMS Knob to highlight the next field.
4) Use the small FMS Knob to enter the desired altitude (from zero to 16,000 feet).
5) To remove the window, press the CLR Key or press the TMR/REF Softkey.
Figure 2-41 MDA/DH Setting
(Timer/References Window)