Garmin G950 Tecnam 2006T - Manual (Page 46)

Garmin G950 Pilot’s Guide for the Tecnam P2006T 190-01146-00 Rev. A 34
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
DISPLAY UNITS
Units in which various quantities are displayed on the G950 screens can be changed on the System Setup
Page.
Changing a display units setting:
1) Use the FMS Knob to select the AUX - System Setup Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired field in the ‘Display Units’ box.
4) Turn the small FMS Knob to select from a list of measurement units and press the ENT Key when the desired
unit is highlighted.
Category Settings Affected Quantities Exceptions
Navigation Angle Magnetic*
True
Heading
Course
Bearing
Track
Desired Track
Wind direction (Trip Planning Page)
Distance and
Speed**
Metric
Nautical* Crosstrack error (HSI)
Bearing distances (information windows)
DME distance (information window)
Flight plan distances
Map ranges
DIS, GS, TAS, XTK fields (Navigation Status Box)
All distances on MFD
Altitude buffer distance (System Setup)
Arrival Alert trigger distance (System Setup)
All speeds on MFD Airspeed Indicator
True Airspeed (PFD)
Wind speed vector
Map range (Traffic Page, Terrain
Page)
CDI scaling (System Setup)
Fuel range calculation (EIS)
Altitude and
Vertical Speed
Feet*
Meters All altitudes on MFD
All elevations on MFD Altimeter
Vertical Speed Indicator
VNV altitudes (Active Flight Plan)
Temperature Celsius
Fahrenheit* All temperatures on PFD
Total Air Temperature (Trip Planning Page) Engine Indication System (EIS)
Fuel and
Fuel Flow**
Gallons* Fuel parameters (Trip Planning Page) Engine Indication System (EIS)
Weight Pounds*
Kilograms N/A N/A
Position HDDD°MM.MM’*
HDDD°MM’SS.S” All positions N/A
* Default setting
** Contact a Garmin-authorized service center to change this setting
Table 1-1 Display Units Settings (System Status Page)