Instrument panel indicators – Acura 2012 TL User Manual
Page 78
If the indicator blinks while driving,
the differential temperature is
You will also see an ‘‘SH-AWD DIFF
TEMP. HIGH’’ message on the
multi-information display (see
Pull to the side of the road when it is
safe, shift to Park, and let the engine
idle until the indicator goes out.
This indicator normally comes on for
a few seconds when you select the
ON mode with the engine start/stop
button (see page
). If it comes on
at any other time, it indicates that
there is a problem with the system.
If this indicator comes on along
with a ‘‘CHECK KEYLESS
STARTING SYSTEM’’ message
on the multi-information display,
there is a problem with the keyless
starting system. In this case, your
vehicle may not restart. If you can
continue to drive safely, take the
vehicle to your dealer and have it
checked as soon as possible. For
more information, see page
.
This indicator has two functions:
If this indicator comes on along
with a ‘‘CHECK KEYLESS
ACCESS SYSTEM’’ message on
the multi-information display,
there is a problem with the keyless
access system. Have the vehicle
checked by your dealer as soon as
possible. For more information,
see page
.
1.
2.
On models with keyless access system
Instrument Panel Indicators
Keyless Access System
Indicator
74
Continuing to drive with the SH-AWD
indicator blinking may cause serious
damage to the system.
11/01/14 18:06:59 31TK4630_079
too high.
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 TL