Acura 2012 TL - Manual (Page 176)

If desired, you can use the
adjustment switches to change the
positions of the seat or outside
mirrors after they are in their
memorized positions. If you change
the memorized position, the
indicator in the memory button will
go out. To keep this driving position
for later use, you must store it in the
driving position memory. To stop the system’s automatic
adjustment, do any of these actions:
Push any of the adjustment
switches for the seat.
The system will move the seat and
outside mirrors to the memorized
positions. The indicator in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps, and the indicator will
remain on.
To change the ‘‘MEMORY
POSITION LINK’’ setting, see
.
Press any button on the driver’s
door: SET, memory button 1 or 2.
If the parking brake is not set,
you must press and hold the
memory button until the
adjustment is complete.
Adjust the outside mirrors.
Shift out of Park (automatic).
Release the parking brake
(manual). On vehicles with manual transmission
Driving Position Memory System
172
11/01/14 18:23:38 31TK4630_177
page 113
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 TL