beautypg.com

Installing a child seat, 2012 tl – Acura 2012 TL User Manual

Page 55

background image

To deactivate the lockable retractor
and remove a child seat, unlatch the
buckle, unroute the seat belt, and let
the belt fully retract.

A child seat with a tether can be
installed in any seating position in
the back seat, using one of the
anchorage points shown above.

Since a tether can provide additional
security to the lap/shoulder belt
installation, we recommend using a
tether whenever one is required

After properly securing the child
seat with the lap/shoulder belt
(see page

), pivot the head

restraint down (see page

) and

route the tether strap over the
head restraint.

1.

49

163

CONTINUED

Installing a Child Seat with

Installing a Child Seat

Using an Outer Anchor

Dr
iv

er
and

P

asseng

er
Saf

e

ty

51

TETHER ANCHORAGE POINTS

TETHER STRAP HOOK

ANCHOR

COVER

COVER

ANCHOR

11/01/14 18:02:52 31TK4630_056

or available.

a Tether

2012 TL

This manual is related to the following products: