beautypg.com

Brake fluid, Brake and clutch fluid – Acura 2012 TL User Manual

Page 557

background image

The fluid level should be between
the MIN and MAX marks on the side
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.

You need to remove the left engine
compartment cover to check the
fluid level (see page

).

Check the fluid level in the
reservoirs monthly. There are up to
two reservoirs, depending on the
model. They are:

Brake fluid reservoir (all models)

Clutch fluid reservoir
(manual transmission models
only)

To access the reservoirs, remove the
left engine compartment cover (see
page

).

You will also see a ‘‘LOW BRAKE
FLUID’’ message on the multi-
information display.

Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.

Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.

Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.

Independent of the Maintenance
Minder information, replace the
brake fluid every 3 years.

542

542

Brake and Clutch Fluid

Brake Fluid

Ma

int
e

na
nce

553

MAX

MIN

11/01/14 19:30:47 31TK4630_558

2012 TL

This manual is related to the following products: