Acura 2012 TL - Manual (Page 564)

Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Start the engine. If you are
replacing a driver’s side bulb, turn
the steering wheel all the way to
the right. If you are replacing a
passenger’s side bulb, turn the
steering wheel to the left. Turn off
the engine.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk, readjustment may be required.
Adjustment should be done by your
dealer or another qualified
technician.
Install the new bulb in the socket
by pushing it straight in the socket
until it bottoms.
Push the under cover in place and
set the inner fender cover in the
original position. Install the bolts
and tighten them securely. Insert
each holding clip, and lock it by
pushing on its center.
Turn on the lights to make sure
the new bulb is working.
Insert the socket into the light
assembly. Turn it clockwise to
lock it in place.
6.
7.
8.
9.
1. Replacing a Front Fog Light Bulb
Lights
560
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
11/01/14 19:32:08 31TK4630_565
Ma
int
e
na
nce
2012 TL