Acura 2012 TL - Manual (Page 560)

Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
To change a bulb on the
passenger’s side, remove the
engine coolant reserve tank by
pulling it out of its stay.
Turn on the headlights to test the
new bulb.
Install the upper part of the air
intake duct securely. Reinstall the
holding clips.
(Driver’s side)
Install all engine compartment
covers.
Install the engine coolant reserve
tank.
(Passenger’s side)
4.
5.
6.
7.
8.
3.
9.
10.
Lights
556
RESERVE TANK BULB
CONNECTOR STAY
11/01/14 19:31:25 31TK4630_561
Ma
int
e
na
nce
2012 TL