Acura 2012 TL - Manual (Page 208)

You must select the ON mode by
operating the engine start/stop
button (see page
) to use the
heaters and the air ventilation
system.
To use the heaters, press the seat
heater button. The indicator (red)
above the button will come on. There
are four settings in the heaters:
HI
Three indicators on.
MID Two indicators on.
LO One indicator on.
OFF All indicators off.
When you press the seat heater
button once, the heater is set to HI.
After the seat reaches a comfortable
temperature, select MID or LOW by
pressing the seat heater button. This
will keep the seat warm. To shut
down the heater, press the seat
heater button until the indicators
Both front seats are equipped with
seat heaters and an air ventilation
system. The passenger seat only has
heaters in the seat bottom because
of the side airbag system.
185
TL with Advance Package and Canadian
Elite Package models
SH-AWD with Advance Package and
Canadian SH-AWD Elite Package
models
Seat Heaters and Ventilations
204
INDICATORS
Driver’s
seat
HEATERS
Passenger’s
seat
SEAT VENTILATION
BUTTON
SEAT HEATER BUTTON
11/01/14 18:29:38 31TK4630_209
go off.
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
2012 TL