Acura 2012 TL - Manual (Page 69)

CONTINUED
This indicator has two functions:
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ‘‘RELEASE
PARKING BRAKE’’ message on
the multi-information display (see
page
).
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key, on models with keyless
access system, if an appropriate
keyless access remote is used. If it is
not a properly coded key or keyless
access remote, the indicator will
blink, and the engine’s fuel system
will be disabled (see page
).
This indicator has two functions:
If it comes on when the engine is
running, the battery is not being
charged, and you will see a
‘‘CHECK CHARGING SYSTEM’’
message on the multi-information
display.
This indicator also comes on when
the battery needs to be replaced
along with a ‘‘REPLACE
BATTERY’’ message on the multi-
information display. For more
information, see page
.
1.
1.
2.
212
596
149
Instrument Panel Indicators
Charging System
Indicator Parking Brake and
Brake System
Indicator Immobilizer System
Indicator
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
65
U.S. Canada
11/01/14 18:05:16 31TK4630_070
Models equipped with the keyless access
system have an engine start/stop button
instead of an ignition switch. ON Mode
is the equivalent of ON (II). For more
information, see pages
184 and 187 .
:
2012 TL