Acura 2012 TL - Manual (Page 508)

The SH-AWD torque distribution
monitor on the multi-information
display shows you the amount of
torque being sent to the wheels.
Each wheel
right front (RF),
Each torque indicator is displayed as
a bar graph divided into 5 segments.
The number of segments represents
the amount of torque distributed to
each wheel.
When there is only a slight change
in torque distribution while driving,
such as cruising on level roads at
the same speed, the torque
distribution monitor may stop
displaying the amount of torque.
This is not a system problem. The
monitor will show the amount if the
system senses any change
in torque distribution.
While the SH-AWD system helps to
enhance the vehicle’s driving
stability in all situations, it is still
your responsibility to drive and
corner at reasonable speeds and to
leave a sufficient margin of safety.
The super handling-all wheel drive
(SH-AWD) system is a full time all-
wheel-drive system that
automatically controls and transfers
varying amounts of engine torque to
all wheels independently, according
to the driving conditions.
If equipped SH-AWD Torque
Distribution Monitor
Super Handling-All Wheel Drive (SH-AWD ) System
504
TORQUE INDICATOR
TORQUE INDICATOR
U.S. model is shown.
TM
11/01/14 19:22:46 31TK4630_509
left front (LF), right rear (RR), ~~~~~~
has its own
torque indicator.
and left rear (LR)
D
riv
ing
2012 TL