HONDA 2010 Ridgeline - Manual (Page 99)

OFF
Parking and indicator lights
Headlights
Push down on the
multi-control lever to signal a left
turn and up to signal a right turn. To
signal a lane change, push lightly on
the lever and hold it. The lever will
return to center when you release it
or complete a turn.
To turn on the high
beams, push the multi-control lever
forward until you hear a click. The
blue high beam indicator will come
on (see page
). Pull the lever back
to return to the low beams.
To flash the high beams, pull the
lever back lightly, then release it.
The high beams will stay on as long
as you hold the lever back.
Your vehicle has heating wires at the
bottom of the windshield to help
heat the wiper blades and the
windshield. If the outside
temperature is near freezing, the
heater turns on automatically when
you turn the ignition switch to the
ON (II) position. The heater turns
off automatically when the outside
temperature is above freezing.
This function helps to increase wiper
performance when the wiper arms
sit in the parked position in snowy or
icy conditions.
1.
2.
3.
67
CONTINUED
Headlight Control Dial Turn Signal
High Beams
Automatic Heated Wiper Zone
Multi-Control Lever, Headlights
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
95
09/07/18 14:13:55 31SJC640_100
2010 Ridgeline