Passenger’s side temperature control dial, Driver’s side temperature display, Driver’s side temperature control dial – HONDA 2010 Ridgeline User Manual
Page 157: Climate control system
The automatic climate control
system in your vehicle maintains the
interior temperature you select. The
system also adjusts the fan speed
and airflow levels.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set either side
temperature to its lower limit
(
) or its upper limit (
),
the system runs at full cooling or
heating only. It does not regulate the
interior temperature.
When you press a fan control button,
the fan is taken out of AUTO mode.
The driver’s and passenger’s side
temperatures should always be set
separately. Turn the desired dial
clockwise to increase the airflow
temperature of that side, and
counterclockwise to decrease it.
Press the Auto button on the front
control panel. You will see AUTO
in the system display.
Adjust the temperature for the
driver’s and passenger’s side
separately, using the desired
temperature control dial.
The passenger’s side temperature
setting does not synchronize to the
driver’s side at any time except when
the system is in the defroster mode
(see page
).
1.
2.
CONTINUED
Using Automatic Climate Control
Temperature Control
Climate Control System
Fe
a
tu
re
s
153
09/07/18 14:24:41 31SJC640_158
2010 Ridgeline