HONDA 2010 Ridgeline - Manual (Page 343)

Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Push down the inner fender.
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb from the fog
light assembly by turning it one-
quarter turn counterclockwise.
Remove the bolts and use the flat-
tip screwdriver to remove the
holding clip located under the
front bumper.
2.
3.
4.
1.
CONTINUED
Lights
Replacing Front Fog/Daytime
Running Light Bulbs
Ma
int
e
na
nce
339
BOLTS INNER FENDER CONNECTOR
TAB HOLDING CLIP
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
09/07/18 14:58:39 31SJC640_344
2010 Ridgeline