HONDA 2010 Ridgeline - Manual (Page 319)

The maintenance item code or codes
indicate the main and sub items
required at the time of the oil change
(see page
).
When the remaining engine oil life is
0 percent, the engine oil life indicator
will blink. The display comes on
every time you turn the ignition
switch to the ON (II) position. The
maintenance minder indicator
(
) also comes on and remains
on in the instrument panel. When
you see this message, immediately
have the indicated maintenance done
by your dealer.
If you do not perform the indicated
maintenance, negative distance
traveled is displayed and begins to
blink after the vehicle has been
driven 10 miles (10 km) or more.
Negative distance traveled means
your vehicle has passed the
maintenance required point.
Immediately have the indicated
maintenance done by your dealer.
You can switch the information
display from the engine oil life
display to the odometer or the trip
meter. Press and release the
SELECT button on the dashboard.
When the engine oil life is 15 to 1
percent, the maintenance minder
indicator (
) comes on every
time you turn the ignition switch to
the ON (II) position, then it goes out
if you switch the information display.
When you see this message, have
the indicated maintenance
performed by your dealer as soon as
possible.
316
CONTINUED
Maintenance Minder
Ma
int
e
na
nce
315
U.S. model is shown.
09/07/18 14:54:32 31SJC640_320
2010 Ridgeline