HONDA 2010 Ridgeline - Manual (Page 166)

If you do not like the stations auto
select has stored, you can store
other frequencies on the preset bars
as previously described.
, press the
A. SEL (auto select) button. This
restores the presets you originally
set.
If you are
traveling far from home and can no
longer receive your preset stations,
you can use the auto select feature to
find stations in the local area.
Press the A. SEL button. ‘‘A.SEL’’
flashes in the display, and the system
goes into scan mode for several
seconds. It stores the frequencies of
six AM, and twelve FM stations in
the preset bars.
You will see a ‘‘0’’ displayed after
pressing a preset bar if auto select
cannot find a strong station for every
preset bar.
Adjusts the
strength of sound from the
subwoofer speaker.
Adjusts the bass.
Adjusts the treble.
Adjusts the front-to-back
strength of the sound.
Adjusts the side-to-
side strength of the sound.
For information on FM/AM radio
frequencies and reception, see page
.
Press the SOUND button repeatedly
to display the SUBWOOFER (if
equipped), BASS, TREBLE, FADER,
and BALANCE settings.
Each mode is shown in the display as
it changes. Turn the VOLUME knob
to adjust the setting to your liking.
When the level reaches the center,
you will see ‘‘
’’ in the display.
The system will automatically return
the display to the selected audio
mode about 10 seconds after you
stop adjusting a mode.
165
To turn off auto select
If equipped
AUTO SELECT
SUBWOOFER
BASS
TREBLE
FADER
BALANCE
Adjusting the Sound
Playing the AM/FM Radio
162
09/07/18 14:26:27 31SJC640_167
2010 Ridgeline