HONDA 2010 Ridgeline - Manual (Page 280)

Insert the built-in key into the shift
lock release slot.
Push down on the key while you
pull the shift lever towards you,
and move it out of Park to neutral.
Remove the key from the shift
lock release slot, then reinstall the
cover. Make sure the notch on the
cover is on the instrument panel
side. Press the brake pedal, and
restart the engine.
If you need to use the shift lock
release, it means your vehicle is
developing a problem. Have it
checked by your dealer.
Your vehicle is equipped with a
Variable Torque Management
4-wheel-drive system (VTM-4 ) that
distributes engine torque to the
appropriate drive axle depending on
the available traction conditions. The
system is completely automatic,
always active, and does not require
any driver interaction.
6. 4.
5.
Automatic Transmission, VTM-4 System
VTM-4 System
276
SHIFT LOCK RELEASE SLOT
COVER
VTM-4 LOCK BUTTON
09/07/18 14:47:09 31SJC640_281
2010 Ridgeline