HONDA 2010 Ridgeline - Manual (Page 180)

Each time you press the DISP button,
the display shows you the text data
on a disc, if the disc was recorded
with text data.
You can see the album, artist, and
track name in the display. If a disc is
recorded in MP3 or WMA, you can
see the folder and file name, and the
artist, album, and track tag.
When you press and release the
DISP button while a disc without text
data is playing, you will see ‘‘NO
INFO’’ on the display.
The display shows up to about 16
characters of selected text data (the
folder name, file name, etc.). If the
text data has more than 17
characters, you will see the first 15
characters and the
indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown. You can see up to 31
characters of the text data.
If you press and hold the DISP
button again, the display shows the
first 15 characters again.
Insert a disc about halfway into the
disc slot. The drive will pull the disc
in the rest of the way to play it. You
operate the disc player with the
same controls used for the radio.
The number of the current track is
shown in the display. When playing a
disc in MP3 or WMA, the numbers
of the current folder and file are
shown. The system will continuously
play a disc until you change modes.
If any letter is not available, it is
replaced with ‘‘ . ’’ (dot) in the display.
When the disc has no text data, you
will see ‘‘NO INFO’’ on the display.
For information on how to handle
and protect compact discs, see page
. 198
To Load a Disc Text Data Display Function
CD Player
176
09/07/18 14:28:53 31SJC640_181
2010 Ridgeline