Maintenance minder – HONDA 2010 Ridgeline User Manual
Page 320
Immediately have the service
performed, and make sure to reset
the display as described as follows.
When the engine oil life is 0 percent
or negative distance traveled, the
maintenance minder indicator
(
) remains on even if you
change the information display.
All maintenance items displayed on
the information display are in code.
For an explanation of these
maintenance codes, see page
.
Your dealer will reset the display
after completing the required
maintenance service. You will see
‘‘OIL LIFE 100%’’ on the information
display the next time you turn the
ignition switch to the ON (II)
position.
If maintenance service is done by
someone other than your dealer,
reset the maintenance minder as
follows:
Turn the ignition switch to the ON
(II) position.
To change the information display
from the engine oil life display to the
odometer or the trip meter, press
and release the SELECT button.
Press the SELECT button
repeatedly until the engine oil life
is displayed.
1.
2.
On models without navigation system
On models without navigation system
Maintenance Main Items and Sub
Items
Resetting the Engine Oil Lif e
Display
Maintenance Minder
316
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEM(S)
09/07/18 14:54:45 31SJC640_321
2010 Ridgeline