3Com 100 TX - Manual (Page 7)

vii
F
IGURES
1-1 Front Panel of LinkBuilder FMS 100-TX Hub 1-2
1-2 Rear Panel of LinkBuilder FMS 100-TX Hub 1-2
2-1 Attaching a Bracket for Rack Mounting 2-3
2-2 Rack Mounting a Single Hub 2-3
2-3 Installing a Hub Stack in a Rack 2-4
2-4 Attaching a Bracket for Desktop Placement 2-5
2-5 Transceiver Interface Modules 2-6
2-6 Connecting the Redundant Power System to Four Hubs 2-8
2-7 Opening the Fuse-holder in the AC Receptacle Assembly 2-9
2-8 Removing the Fuse 2-10
3-1 LinkBuilder FMS 100-TX Hub Supporting 11 Users and a Server 3-2
3-2 Pin Assignments for Straight-Through Cabling 3-3
3-3 RJ-45 Connector Pin Assignments 3-3
3-4 Interconnecting Two Hubs 3-4
3-5 Connecting a Hub Stack to a Management Unit 3-5
3-6 Connecting Hubs to the Network Backbone 3-6
3-7 10 and 100 Mbps Collision Domains Connected by a Switching Hub 3-8
3-8 Class I Hub 3-9
3-9 Class II Hubs 3-10
3-10 LED Indicators 3-11
3-11 Unit Digital Display 3-12
3-12 Power-Up Disabled Option Switch 3-13
4-1 Connecting the Hub to a Workstation 4-2
4-2 Connecting the Hub in a Network Span of 260.8 Meters 4-3
4-3 Using an Internetworking Device to Extend the Network Span 4-4