Xerox 701P21091 - Manual (Page 297)

Specifying print format parameters
Using LCDS Print Description Language 4-57
Default NO
OUTPUT
GRAPHICS
parameter: points
to note
• If you are using the IMAGE parameter in conjunction with
GRAPHICS, make sure to list the GRAPHICS parameter first,
as these two parameters are order dependent.
• In Batch mode, only one graphic is imaged per page.
• After a graphic has been processed as part of the job, if a
switch to a JDE with GRAPHICS = NO occurs, the
GRAPHICS = NO specification is ignored.
OUTPUT
GRAPHICS
parameter
examples
OUTPUT IDFAULT
Specifies the default ink that will be used for objects whose ink is
not specified. This parameter remains in effect until another
IDFAULT parameter is specified.
Syntax OUTPUT IDFAULT = ‘inkref’’
Unused options: The following options are ignored by the DP EPS. They are included here
for compatibility.
MOVE Specifies that all referenced graphic disk files will be copied into the print file.
(On the DP EPS, YES is used instead.)
NOSUB If a graphic is missing, specifies that no substitution for the missing graphic
image is desired. (This option is ignored by the DP EPS.)
Table 4-56. OUTPUT GRAPHICS parameter options and definitions (Continued)
Option Definition
OUTPUT GRAPHICS=BATCH, RESOLUTION=300;
OUTPUT GRAPHICS=MOVE, RESOLUTION=300,
PURGE=NO;