Message command – Xerox 701P21091 User Manual

Page 278

Text mode
Original mode

Specifying print format parameters

4-38

Using LCDS Print Description Language

Figure 4-2. Sample data record structure

Example 3

LINE PCCTYPE=NONE, DATA=(1,57), VFU=V1;

MESSAGE command

The MESSAGE command permits you to inform the operator of
special conditions by displaying user defined text on the screen.

•

All MESSAGE command parameters must be specified in a
single command. If multiple message commands are
specified, the parameters in the final command are applied.

•

The DP EPS systems do not support the bar code option. Bar
code commands that are encountered by the controller are
ignored, and no syntax errors are noted. No messages or
operator information pages are generated.