Xerox 701P21091 - Manual (Page 166)

Specifying input parameters
2-58 Using LCDS Print Description Language
Syntax VOLUME DBCS = {YES | NO}
Options
Default NO
VOLUME EMTYPE
Specifies the emulation type with which the system will print text.
Syntax VOLUME EMTYPE = {T1 | T2 }
Options
Default YES
VOLUME EMTYPE
parameter: point
to note
This parameter is ignored for online printing unless one of the
following VOLUME HOST parameter options for online printing is
specified:
• HOST=FUJITSU; FUJONL KANJI=YES
• HOST=HITACHI; HITONL KANJI=YES
VOLUME EOV
Specifies the action the system takes when it encounters an end
of volume (EOV) on the input data tape.
Table 2-60. VOLUME DBCS parameter options and definitions
Option Definition
YES Allows printing of a data stream of intermixed single-byte and double-byte
characters.
NO Allows printing only of single-byte characters.
Table 2-61. VOLUME EMTYPE parameter options and definitions
Option Definition
T1 Interprets the function codes and the specified print positions, using the
existing compatible formats.
T2 Interprets function codes and the specified print positions using the format for
the host computer.