ZyXEL Communications Broadband Security Gateway P-312 - Manual (Page 82)

P312 Broadband Security Gateway
NAT 6-9
Figure 6-8 First Set in Menu 15.1.1
The Type, Local and Global Start/End IPs are configured in Menu 15.1.1.1 (described
later) and the values are displayed here.
Ordering Your Rules
Ordering your rules is important because the Prestige applies the rules in the order that you specify. When a
rule matches the current packet, the Prestige takes the corresponding action and the remaining rules are
ignored. If there are any empty rules before your new configured rule, your configured rule will be pushed
up by that number of empty rules. For example, if you have already configured rules 1 to 6 in your current
set and now you configure rule number 9. In the set summary screen, the new rule will be rule 7, not 9.
Now if you delete rule 4, rules 5 to 7 will be pushed up by 1 rule, so as old rule 5 becomes rule 4, old rule 6
becomes rule 5 and old rule 7 becomes rule 6.
The description of the other fields is as described above. The Type, Local and Global Start/End IPs are
configured in Menu 15.1.1.1 (described later) and the values are displayed here.
Table 6-5 Menu 15.1.1
Field Description Option
Set Name Enter a name for this set of rules. This is a required
field. Please note that if this field is left blank, the
entire set will be deleted.
Action There are 4 actions. The default is Edit. Edit means
you want to edit a selected rule (see following field).
Insert Before means to insert a rule before the rule
selected. The rules after the selected rule will then be Edit
Insert Before
Delete and
Save Set
Menu 15.1.1 - Address Mapping Rules
Set Name= NAT_SET
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1.
2
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit Select Rule=
Press ENTER to Confirm or ESC to Cancel: