ZyXEL Communications Broadband Security Gateway P-312 - Manual (Page 61)

P312 Broadband Security Gateway
4-2 Remote Node Setup
Table 4-1 Fields in Menu 11.1
Field Description Examples
Rem Node Name Enter a descriptive name for the remote node. This field can
be up to eight characters. LAoffice
Active Press the [SPACE BAR] to toggle between Yes and No and
activate (deactivate) the remote node. Yes
Encapsulation Ethernet is the default encapsulation. Press the [SPACE
BAR] if you wish to change to PPPoE encapsulation. Ethernet
Service Type Press the [SPACE BAR] to select from Standard, RR-
Toshiba (RoadRunner Toshiba authentication method) or
RR-Manager (RoadRunner Manager authentication
method). Choose one of the RoadRunner methods if your
ISP is Time Warner's RoadRunner; otherwise choose
Standard. Standard
Service Name This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation, then
type the name of your PPPoE service here. poellc
Outgoing: My
Login This field is applicable for PPPoE encapsulation only. Enter
the login name assigned by your ISP when the Prestige
calls this remote node. Some ISPs append this field to the
Service Name field above (e.g.,
jim@poellc ) to access the
PPPoE server.
jim
Outgoing: My
Password Enter the password assigned by your ISP when the Prestige
calls this remote node. Valid for PPPoE encapsulation only. *****
Server IP This field is valid for RoadRunner service type only. The
Prestige will find the RoadRunner Server IP automatically if
this field is left blank. If it does not, then you must enter the
authentication server IP address here.
Route This field refers to the protocol that will be routed by your
Prestige – IP only for the P312. IP
Edit IP This field leads to a “hidden” menu. Press the [SPACE BAR]
to select Yes and press [ENTER] to go to Menu 11.3 -
Remote Node Network Layer Options. Yes
Session Options:
Edit Filter sets This field leads to another “hidden” menu Use the [SPACE
BAR] to toggle this field to Yes and press [ENTER] to open
Menu 11.5 to edit the filter sets. See the Remote Node Filter
section for more details. Yes