ZyXEL Communications Broadband Security Gateway P-312 - Manual (Page 136)

P312 Broadband Security Gateway
Transferring Files 10-9
Figure 10-8 FTP Session Example
The system reboots after a successful upload.
The following table describes some of the fields that you may see in third party FTP clients.
Table 10-3 Third Party FTP Clients –General fields
Host Address Enter the address of the host server. Parameters for
Prestige
Login Type Anonymous.
This is when a user I.D. and password is automatically
supplied to the server for anonymous access. Anonymous
logins will work only if your ISP or service administrator has
enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Normal
Transfer Type Transfer files in either ASCII (plain text format) or in binary
mode. Binary
Initial Remote
Directory.
Specify the default remote directory (path).
Initial Local
Directory.
Specify the default local directory (path).
FTP over WAN will not work if:
1. You have disabled Telnet service in Menu 24.11.
2. You have applied a filter in Menu 3.1 (LAN) or in Menu 11.5 (WAN) to block Telnet service.
3. The IP you entered in the Secured Client IP field in Menu 24.11 does not match the client IP. If it does
not match, the Prestige will disconnect the Telnet session immediately.
4. You have an SMT console session running.
5. The firewall is active. The default firewall policies block all traffic from the WAN, so to enable FTP
over the WAN, you must turn the firewall off (Menu 21.2) or create a firewall rule to allow FTP from
the WAN.
Connected to 312.x.x.x
220 P312 FTP version 1.0 ready at Thu Jan 20 18:00:02 2000
User (312.x.x.x:(none)):
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> put p312e.bin ras
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 297.89Kbytes/sec.
ftp> quit