ZyXEL Communications Broadband Security Gateway P-312 - Manual (Page 129)

P312 Broadband Security Gateway
10-2 Transferring Files
Table 10-1 Filename Conventions
File Type Internal
Name
External
Name
Description AT
Command
Configuration
File Rom-0 *.rom This is the router configuration filename
on the Prestige. Uploading the rom-0 file
replaces the entire ROM file system,
including your Prestige configurations,
system-related data (including the baud
rate and default password), the error log
and the trace log. ATLC
Firmware Ras *.bin This is the generic name for the ZyNOS
firmware on the Prestige. ATUR
10.1.1 Firmware Development
It is important to upgrade your firmware regularly, especially if there are problems. If you discover an
unexpected behavior, or bug, see if your problem is mentioned in the release notes. Load it according to
instructions (e.g., see if the default configuration file is needed also). If the problem still exists, e-mail or
call tech support.
10.2 Backup Configuration
Option 5 from Menu 24 - System Maintenance allows you to backup the current Prestige configuration to
your workstation. Backup is highly recommended once your Prestige is functioning properly. FTP and
TFTP are the preferred methods for backing up your current workstation configuration to your computer
since FTP and TFTP are faster. You can also perform backup and restore using menu 24 through the
console port. Any serial communications program should work fine; however, you must use XMODEM
protocol to perform the download/upload and you don’t have to rename the files (see section 10.1).
Please note that terms “download” and “upload” are relative to the workstation. Download means to
transfer from the Prestige to the workstation, while upload means from your workstation to the Prestige.
Figure 10-1 Menu 24.5 - System Maintenance - Backup Configuration
Menu 24.5 -- System Maintenance - Backup Configuration
Ready to backup Configuration via Xmodem.
Do you want to continue (y/n):