ZyXEL Communications Prestige 128IMH - Manual (Page 96)

Prestige 128IMH ISDN Modem/ Router/Hub
6-6 IPX Configuration
6.4 IPX Ethernet Setup
From Menu 3 - Ethernet Setup, select option Novell IPX Setup to go to Menu 3.3 - Novell IPX
Ethernet Setup as shown in the figure below.
Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup
The following table describes the Novell IPX Ethernet Setup Menu.
Table 6-1 Novell IPX Ethernet Setup Fields
Field Description Options
Seed Router Determine if your Prestige is to act as a seed router. Yes/No
Frame Type Enable/Disable the individual frame type. Remember to enable only
the ones that are actually used on your network. 802.2
802.3
Ethernet II
SNAP
IPX Network
# If your Prestige is a seed router, enter a unique network number for
each frame type enabled.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.