ZyXEL Communications Prestige 128IMH - Manual (Page 174)

Prestige 128IMH ISDN Modem/ Router/Hub
14-20 System Maintenance
14.7 Command Interpreter Mode
This option allows you to enter the command interpreter mode. A list of valid commands can be
found by typing [help] at the command prompt. For more detailed information, check the ZyXEL
Web site or send e-mail to the ZyXEL Support Group.
Figure 14-15 Command mode
14.8 Call Control
The Prestige provides four call control functions: call control parameters, blacklist, budget
management andcall history..
Call control parameters allows you to set a dial out time limit, the number of times a number
should be called before it is added to the blacklist and the interim between calls.
The budget management function allows you to set a limit on the total outgoing call time of the
Prestige over a period of time. When the total outgoing call time exceeds the limit, the current call
will be dropped and any future outgoing calls will be blocked.
The blacklist function prevents the Prestige from re-dialing to an unreachable phone number. It is
a list of phone numbers, up to a maximum of 14, to which the Prestige will not make an outgoing
call. If the Prestige tries to dial to a phone number and fails a certain number of times
Enter Menu Selection Number: 8
Copyright (c) 1994 - 1998 ZyXEL Communications Corp.
ras> ?
Valid commands are:
sys exit device ether
isdn radius ip ppp
bridge ipx