ZyXEL Communications Prestige 128IMH - Manual (Page 153)

Prestige 128IMH ISDN Modem/ Router/Hub
Telnet Configuration 13-1
Chapter 13
Telnet Configuration and Capabilities
13.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the
console port. Once your Prestige is configured, you can use telnet to configure it remotely as
shown below.
Figure 13-1 Telnet Configuration on a TCP/IP Network
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still available
provided you assign the Prestige a correct IP address and subnet mask. When IP routing is
disabled, the Prestige can still function as a host.