ZyXEL Communications Prestige 128IMH - Manual (Page 46)

Prestige 128IMH ISDN Modem/ Router/Hub
2-10 Hardware Installation and Setup
14 Dial-in User Setup Use this menu to setup dial-in users.
15 SUA Server Setup Use this menu to specify inside servers when SUA is enabled .
21 Filter Set Configuration Use this menu to setup filters to provide security, call control, etc.
22 SNMP Configuration Use this menu to setup SNMP related parameters
23 System Security Use this menu to setup security related parameters.
24 System Maintenance This menu provides system status, diagnostics, firmware upload, etc.
99 Exit To exit from SMT and return to the blank screen.
2.6 Changing the System Password
The first thing your should do before anything else is to change the default system password by
following the steps below.
Step 1. Enter 23 in the Main Menu to open Menu 23 - System Security as shown below.
Step 2. Enter 1 in Menu 23 to open Menu 23.1 - System Security - Change Password.
Figure 2-6 Menu 23 - System Security
Menu 23 - System Security
1. Change Password
2. External Server
Enter Menu Selection Number: 1