beautypg.com

ZyXEL Communications Prestige 128IMH User Manual

Page 170

background image

Prestige 128IMH ISDN Modem/ Router/Hub

14-16

System Maintenance

14.6.2 Uploading Router Configuration File

The configuration data, system-related data, the error log and the trace log are all stored in the
configuration file. Please be aware that uploading the configuration file replaces everything
contained within.

Menu 24.7.2 shows you the instructions for uploading the configuration file. If you answer yes to
the prompt, the Prestige will go into debug mode. Follow the procedure below to upload the
configuration file:

1. Enter “atur3” after the “Enter Debug Mode” message.

2. Wait for the “Starting XMODEM upload” message before activating Xmodem

upload on your terminal.

3. After successful firmware upload, enter “atgo” to restart the Prestige.

If you replace the current configuration file with the default configuration file, i.e., p128IMH.rom,
you will lose all configurations that you had before and the speed of the console port will be reset
to the default of 9600 bps with 8 data bit, no parity and 1 stop bit (8n1) . You will need to change
your serial communications software to the default before you can connect to the Prestige again.
The password will be reset to the default of 1234, also.