ZyXEL Communications Prestige 128IMH - Manual (Page 107)

Prestige 128IMH ISDN Modem/ Router/Hub
Bridge Setup 7-5
7.3 Bridge Static Route Setup
Similar to network layer static routes, a bridging static route tells the Prestige about the route to a
node before a connection is established. You configure bridge static routes in Menu 12.3.1, by
pressing 3 in menu 12 and then selecting one of the bridge static routes as shown below.
Figure 7-3 Menu 12.3 - Bridge Static Route Setup
Figure 7-4 Menu 12.3.1 - Edit Bridge Static Route
Menu 12.3 - Bridge Static Route Setup
1. ________
2. ________
3. ________
4. ________
Enter selection number:
Menu 12.3 - Edit Bridge Static Route
Route #: 21
Route Name=
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Pres s ENTER to CONFIRM or ESC to CANCEL: