Xantrex Technology XTR 850 Watt - Manual (Page 270)

Index
IX–2 975-0200-01-01
setting protection 3–22
foldback mode, defined 3–22
front panel display
7 segment font 3–8
illustrated 1–5
G
gain calibration, effect of 6–5
gain error, described 6–2
I
IEEE
GPIB cable 5–14
Std. 488.1 1987 A–2
Std. 488.1999 2 17.1.2 5–48
Std. 488.2 1992 A–2
Std. 488.2 1999 12.5.2 5–48
Std. 488.2 1999 12.5.3 5–48
Std. 488.2 Register Model 5–25
Std. 488.2 registers 5–25
Std. 488.2 syntax error 5–31
inactivity timeout
default 3–6
described 3–6
Information about Your System form WA–4
J
J1, analog programming connector 1–8
J2, Ethernet (ENET) or GPIB connector
(optional) 1–8
J3, AUX output and isolated analog programming
connector 1–8
J4, RS-232/RS-285 connector in port 1–8
J5, USB connector 1–8
J6, RS-485 connector 1–8
L
local lockout, described 3–10
local operation
coarse adjustment mode 3–2
fine adjustment mode 3–3
M
menu system
navigating 3–2 , 3–4
select and set model procedure 3–4
setting VOL and CUR modes 3–4
N
normal display mode, described 3–6
O
offset calibration, effect of 6–5
offset error, described 6–2
P
parameter types
A–6
boolean A–6
discrete A–6
numeric A–7
string A–7
parameters, units of measure and multipliers A–2
power supply
proof of purchase WA–4
purchase date WA–4
serial number WA–4
R
Rotary knob/enter button, using 3–2
S
SCPI A–4
command hierarchy A–3
command structure A–3
command summary A–14
command tree A–8
common commands A–6
conformance information A–2
described A–3
minimum and maximum A–6
parameter types A–6
requirements A–2