Xantrex Technology XTR 850 Watt - Manual (Page 234)

A-26 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Alarm
Masking [:]SYSTem[]:PROTection[:MASK] Enable/disable alarms/
protection. ?|255) Yes
Set Alarm
Output
Latches [:]SYSTem:PROTection:LATCh Sets the Alarm Output
Latches. See Table 3-6 on
page 3–21. ?| latch flags> Yes
Table A-10 Status Commands
Function SCPI Command Description
Parameter and
Range
Query
Query
Operation
Status
Condition
Register [:]STATus[]:OPERation
:CONDition?
Query the Operations
Condition Register.
See Table 5-11 on page 5–
34. Yes
Set Operation
Status Enable
Register [:]STATus[]:OPERation:ENABle Access the Operations
Enable Register.
See Table 5-11 on page 5–
34. ?|(0–65535)> Yes
Query
Operation
Status Event
Register [:]STATus[]:OPERation[:EVENt]
?
Query the Operations Event
Register.
See Table 5-11 on page 5–
34. Yes
Set Operation
Status
Negative
Transition
Register [:]STATus[]:OPERation
:NTRansition
Access the Operation
Negative Trans Filter
Register.
See Table 5-11 on page 5–
34. ?|- (0–65535)> Yes
Table A-9 System Commands (Continued)