Xantrex Technology XTR 850 Watt - Manual (Page 226)

A-18 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Table A-4 SCPI Commands for Calibration
Function SCPI Command Description
Parameter and
Range
Query
Restore
Factory
Calibration [:]CALibration[]:RESTore Restores the calibration to
the factory defaults. N/A N/A
Calibrate
OVP
protection. [:]CALibration[][:VOLTage]
:PROTection[:OVER]
Calibrate the over voltage
protection. in Volts> No
Enter Output
Voltage Data [:]CALibration[]:OUTPut
:VOLTage
Calibrates the output
voltage. volts> No
Enter Output
Current Data [:]CALibration[]:OUTPut
:CURRent
Set voltage output
calibration level amps> No
Calibrate the
Voltage
controlled
Non Isolated
Voltage APG
feature [:]CALibration[]:MONitor
[:VOLTage]
Calibrate the voltage
monitor signal system. ? | |
interactive mode> Yes
Calibrate the
Voltage
controlled
Isolated
Voltage APG
feature [:]CALibration[]:MONitor
[:VOLTage]:ISOLated
Calibrate the isolated
voltage monitor signal
system. ? | |
interactive mode> Yes
Calibrate the
Voltage
controlled
Non Isolated
Current APG
feature [:]CALibration[]:MONitor
:CURRent
Calibrate the current
monitor signal system. ? | |
interactive mode> Yes