Xantrex Technology XTR 850 Watt - Manual (Page 230)

A-22 975-0200-01-01 S
C
PI
C
o
mm
an
d
R
e
fe
re
n
ce
Power
Auxiliary
Output
Control [:]OUTPut:AUXilliary:PON[:STATe] Control Aux Output
Autostart State (Enable/
Disable) ?|ON|OFF Yes
Table A-8 SCPI Commands for Triggering
Function SCPI Command Description
Parameter and
Range
Query
Set Immediate
Initiation of
Trigger
System [:]INITiate[][:IMMediate] Triggers the Autosequence
Program. N/A
Table A-9 System Commands
Function SCPI Command Description
Parameter and
Range
Query
Set the menu
system
timeout [:]SYSTem:FPANel[:TIMeout] Sets the menu system
timeout. <1–20 to one decimal
place seconds> Yes
Resets the
Instrument to
default
values. [:]SYSTem[]:RESet Resets all values to default
state (excluding calibration
data). N/A
Wait to
Continue [:]SYSTem[]:WAIT Wait to continue command. N/A
Table A-7 SCPI Commands for Power (Continued)
Function SCPI Command Description
Parameter and
Range
Query